Inline images
Soil Testing and Field Testing Services
At RKCT, we offer comprehensive soil testing and field testing services to assist you in making informed decisions for your construction projects. Our expert team utilizes industry-standard testing methods and state-of-the-art equipment to provide accurate and reliable results. Whether you need grain size analysis, permeability tests, or field testing services, we have you covered.
Sub Soil Exploration and Testing in site
Grain Size Analysis
As a trusted soil testing lab in Jabalpur, we specialize in grain size analysis. Our team follows the IS-2720-PART-IV-1985 RA-2015 standards to determine the distribution of soil particles and provide valuable insights into its engineering properties.
Atterberg Limits
At RKCT's soil testing lab in Jabalpur, we conduct Atterberg Limits tests according to the IS-2720-PART-V-1985 RA-2015 guidelines. This assessment helps determine the moisture sensitivity of soil and its behavior under different moisture conditions
Specific Gravity
Our specific gravity testing, in accordance with the IS-2720-PART-III-1980 RA-2016 standards, provides a measure of soil density and compactness. This information is essential for various geotechnical analyses and design considerations.
Permeability Test
Determining the permeability of soil is crucial for understanding its ability to allow water or other fluids to pass through. Our permeability tests follow the IS-2720-PART-17-1986 RA-2016 guidelines, providing valuable data for drainage and seepage studies.
Direct Shear Test
The direct shear test, conducted according to the IS-2720-PART-XIII-1986 RA-2015 standards, assesses the shear strength of soil. This information helps evaluate the stability and resistance to sliding of soil in various engineering applications.
Unconfined Compressive Strength
We conduct unconfined compressive strength tests based on the IS-2720 PART-X-1991 RA-2015 guidelines. This testing determines the load-bearing capacity of soil without lateral support and assists in foundation design and stability assessments.
California Bearing Ratio (C.B.R.)
The California Bearing Ratio test, performed following the IS-2720-PART-XVI-1987 RA-2016 standards, evaluates the strength of soil subgrades and base courses. This information is essential for designing and constructing pavements and roads.
Swelling Pressure
Our swelling pressure tests, conducted according to the IS-11550-1985 RA-2016 standards, assess the swelling potential and volume change characteristics of soil. This information is crucial for designing foundations and structures in expansive soil areas.
Compaction Test (Light & Heavy)
We perform compaction tests, both light and heavy, following the IS-2720-PART-VII & VIII 1983 RA 2015-16 standards. These tests evaluate the compaction properties of soil, aiding in determining its suitability for construction projects.
Consolidation Test
Our team conducts consolidation tests based on the IS-2720-PART-XV-1965 RA-2016 standards. These tests provide insights into the settlement behavior of soil under different loading conditions and help assess its stability.
Triaxial Test
Triaxial tests, conducted in accordance with the IS-2720-PART-XI-1993 RA-2016 guidelines, are used to evaluate the strength and stress-strain behavior of soil under controlled conditions. This information is vital for geotechnical design and analysis.
Vane Shear Test
We perform vane shear tests as per the IS-2720-PART-XI-1993 RA-2016 standards to determine the shear strength of cohesive soils. These tests help assess the stability and bearing capacity of soil in various engineering projects.
Field Testing Services:
Mechanical Drilling Using Hydraulic
Our hydraulic drilling equipment ensures precise and efficient soil drilling for various purposes, including soil investigation, sampling, and data collection. We utilize mechanical drilling techniques to obtain accurate soil profiles.
Borehole Drilling Using Auger
Using advanced auger equipment, we provide reliable borehole drilling services. Auger drilling is ideal for collecting undisturbed soil samples and assessing subsurface conditions accurately.
Standard Penetration Test
We conduct the Standard Penetration Test (SPT) following the IS-2131-1981[RA-2016] standards. This in-situ test helps determine the relative density and consistency of soils, providing valuable data for geotechnical analysis and foundation design.
Plate Load Test
Our plate load tests, conducted according to the IS-1888-1982 [RA-2016] guidelines, assess the load-bearing capacity and settlement characteristics of soil under controlled loading conditions. This testing is crucial for structural design and foundation evaluations.
Dynamic Pile Load Test
For pile foundations, we perform dynamic pile load tests based on the IS-9716-1981-RA-2013 standards. These tests determine the load-carrying capacity of piles, ensuring their structural integrity and compliance with design requirements.
Sand Replacement
Our sand replacement testing, following the IS-2720-PART-XXVIII-1974 standards, measures soil density and determines its compaction characteristics. This information is essential for earthwork quality control and compaction specifications.
Core Cutter Method
Our rapid moisture meter test provides quick assessments of soil moisture content, allowing for immediate decision-making during construction and engineering projects.
Bridge Load Test
We conduct bridge load tests to evaluate the load-carrying capacity and structural integrity of bridges. This testing ensures the safety and durability of the bridge infrastructure.
Electrical Resistivity Test
The electrical resistivity test measures soil's electrical properties to assess its moisture content and subsurface conditions. This information aids in geotechnical investigations and understanding ground behavior.
Structure Test
Our team conducts consolidation tests based on the IS-2720-PART-XV-1965 RA-2016 standards. These tests provide insights into the settlement behavior of soil under different loading conditions and help assess its stability.
Triaxial Test
Triaxial tests, conducted in accordance with the IS-2720-PART-XI-1993 RA-2016 guidelines, are used to evaluate the strength and stress-strain behavior of soil under controlled conditions. This information is vital for geotechnical design and analysis.
Vane Shear Test
We perform vane shear tests as per the IS-2720-PART-XI-1993 RA-2016 standards to determine the shear strength of cohesive soils. These tests help assess the stability and bearing capacity of soil in various engineering projects.
Marshall stability test
(IS-1205:1978)
Flash And Fire
(IS-1209 PART-XXI-1978)(RA-2014)
Penetration test
(IS-1203:1978)(RA-2013)
Tar viscometer
(IS-1209 PART-II-1978)
Ductility testing apparatus
(IS-1208-1978) (RA-2014)
Bitumen Extractor
The Instrument is used for determination and checking of Bitumen percentage in bituminous mix, the mix is added with solvent and dissolved bitumen is removed by centrifugal action.
Rock well Hardness Test
As per IS:1586
Steel IZOD Impact Test & Charpy Impact Test
As per IS:1598 & IS:1757